Monday, April 30, 2012

Choosing the right Surgical Technique


Presently there are three different techniques to take the hair from the back and sides of the head and transplant in the concerned area of thinning or balding. Following are the techniques.
1- Auto Cloning
2- Follicular Unit Extraction FUE
3- Long Hair Technique
Auto Cloning
Donor area is marked, a vertical line is drawn in front of the ear, behind this vertical line, in the parietal and occipital area, 2cm of healthy hair are left in the upper and the lower margins. The area within the above mentioned margins is considered the Donor area for Auto Cloning.
Special surgical Forceps are used for plucking the hair. An average 30 hair are firmly held in the forcep close to the scalp and these firmly held hair are plucked out with gentle wrist jerk. Most of the hair come out with this technique have intact inner and outer root sheaths. The pulled hair are delicate and are placed in chilled saline and treated with A cell growth factor for better survival.
Alternative Techniques of Performing Auto Cloning
Platelet Enriched Plasma
The plucking technique is same. 20-30 cc of client blood is drawn and centrifuged, it separates the blood into 3 layers, Red blood cells, white blood cells and platelets enriched plasma. Plucked follicles are treated with persons own activated platelets. These activated platelets have growth factors as well as few inhibitory factors. Due to presence of inhibitory factors in the activated platelets the survival of plucked hair treated with activated platelets alone are inconsistent and the survival varies from average to good. A Cell is driven from pork bladder cells. If the client wants to choose the Auto cloning technique without A Cell, only in this situation Activated platelets should be used to treat the plucked hair.
Stem Cells
Approximately 10 CC of fat is taken from the abdomen by liposuction. The fat is centrifuged, then treated with collagenase and incubated. The process allows separation of stem cells, each CC of fat provide an average 500,000 to one million stem cell. The plucked hairs are treated with these stem cells. Stem cell treatment of plucked hair is under study at the moment.
Advantages of Auto Cloning
1-The hairs which are plucked with this technique grows back in the donor area. In Long Hair Technique and FUE Techniques, it's the redistribution of hair and total number of hair after transplant stays the same. In Auto Cloning the total number of hair increase after the transplant as the plucked hair 100% grows back in the Donor area and 50-70% of plucked hair grows in the transplanted area.
2-Clients with limited donor hair can benefit from this technique.
3-Donor area scars of the previous hair transplants can be treated with this technique.
4-If the person does not want to use FDA approved medication to help reduce or stop the hair loss, Auto Cloning can be repeated without depleting the donor area.
5-There is no temporary numbness of donor area.
Disadvantage of auto cloning
1-Good density in one surgery could not be attained with Auto Cloning, as the survival of the plucked transplanted hair is 50-70%.
2- Auto Cloning works on 80% of the clients. The plucked hair in the remaining 20% of the clients come out without outer root sheath, if planted they do not survive.
Follicular unit extraction ( FUE )
Donor area is marked, a vertical line is drawn in front of the ear, behind this vertical line, in the parietal and occipital area,  2cm of healthy hair are left in the upper and the lower margins . The area within the above mentioned margins is considered the Donor area for FUE.
A shaved donor area is needed for Follicular unit extractions. The donor area can be partially or completely shaved. If the Donor area is completely shaved, 2000-3000 follicular units can be extracted in one day surgery. If donor area is partially shaved in a way that top hair cover the shaved areas, in this situation only 1000-1500 follicular units can be extracted. Special micro punches are used to punch out the follicular units. Motorized micro punches are faster.
FUE-Follicular Unit Extraction Technique
Different approaches for follicular extraction
1- Manual micro punches technique
2- Motorized micro punches technique
3- Motorized Suction punches technique
4- Robotic punch technique
For extraction few Doctors prefer using manual punches  and few prefer motorized punches . There is also a suction based extraction machine, hair technician mostly operate this machine to save time for the hair transplant surgeon. There is robotic machine available for follicular unit extraction as well.
The goal in using any of the above mentioned technique is minimum damage during extraction.
Advantages of FUE
1-Once the donor area heals , there is no noticeable scarring in the donor area .
2-Client has the flexibility to wear the hair extremely short or even shave off the hair without the fear of any visible scaring in the donor area.
3-If the donor area is very tight, FUE technique can be used.
4-FUE could be combined with long hair technique to maximize the total numbers of follicular units transplanted in one surgery. In long hair Technique, there is a maximum safe limit of taking out follicular units, which varies individually from an average 2000 to 6000 follicular units. For example 5000 follicular units are obtained by long hair technique; still average 500 to 1000 follicular units can be extracted by FUE technique without adding any tension to the donor area.
5- FUE can be repeated after one month, long hair technique can not be repeated before 6 month.
Disadvantages of FUE
1-The micro punch is moved down over the follicular unit to cut free the tissue around the follicular unit, so the follicular unit free to be extracted out with fine forceps.  Due to blind cutting to make the follicular units free to be extracted, the punch can damage an average 5% of the follicular units.
2-The punching and extracting out process in FUE can traumatize the follicular units it can lead to decrease survival.
3-There is a limitation of an average 2000 to 3000 follicular units extraction in one surgery.
4-If the head is shaved to extract maximum follicular units, extraction sites are visible for on an average 10 days.
5-In transplanted area surgery is noticeable for an average 10-15 days.
6-There is Temporary numbness feeling in the Donor and transplanted area.
Long Hair Technique
A horizontal line is marked In the middle of parietal and occipital area, leaving equal amount of hair above and below the line. Depending on the individual flexibility and laxity of the Scalp, this marked line is stretched on an average from 1cm to 2.5 cm. An incision of an average 0.5 mm deep in the direction of hair is made at the upper and lower borders of the marked donor area. Skin hooks are used to open up the upper and lower incision. The incision margins are stretched by skin hooks, the follicular units in the incised area get separated. As this technique offers direct visualization, there is no damage to the hair. The extracted hairs are intact and non traumatized. Once the Donor hair strip is out, there is an average 1-2 cm gap depending on the width of the extracted strip and upper and lower skin margins. In the upper skin margin, an average 1 mm wide and 3/4 mm deep tissue is shaved (Trichophytic Technique). In the tissue gap, A Cell growth factor sheath is laid for better healing.  The upper and lower edges are fine stitched together. Hair grows out in the scar line because of Trichophytic technique, most of the time scar line becomes undetectable due to trichophytic closure.
The follicular units are separated under the microscopes. The average hair damage in strip removal and in the preparation of follicular units under the microscope is 0 to 0.4 % of the total number of hair.
Alternative Approaches For Long Hair Technique
Most of the doctors Trim the marked donor area. Incision is made up to the full follicular depth by single or multiple blades, A Cell is not used. Full follicular depth incision leads to higher hair damage.  Use of multiple blades further increases the risk of higher follicular damage.
Advantages of Long Hair Technique
1-There is damages of 0 - 0.4% in comparison with FUE damage of 5% in follicular units preparation.
2-These follicular units are intact and non traumatized with almost 100% survival.
3-An average 4000 follicular units can be performed in one surgery. If the flexibility and density is good, an average of 6000 follicular units can be performed in one surgery.
4-Long hair Technique could be combined with FUE or Auto Cloning to increase the number of follicular units transplanted in one surgery. If the donor area is very good and has good laxity and flexibility, combining long hair technique and auto cloning can provide up to 10,000 follicular units to be transplanted.
5-Higher follicular unit numbers and near100% survival help to achieve client’s goals in one surgery.
6-The donor hair is not shaved or trimmed, stitches are covered by one’s own hair.
7-The same length transplanted hair on the front keep the surgery sites unnoticeable.
8-The long hair transplanted in the hairline give the preview of the future hairline and outcome. Follicular units can be readjusted if needed during the surgery depending on the initial look.
9-Trichophytic fine stitch closure and use of A Cell sheath, leads to very fine scar and sometime unnoticeable scar. The area is covered by one’s own hair.
Disadvantages of Long Hair Technique
1-If a person trim the hair extremely short like No 1 Machine or shave off the hair, there are chances of noticeability of stitches mark or fine scar in the donor area.
2-Temporary numbness feeling in the donor area.
3-Increase chances of shock hair loss in the transplanted area. Hair lost due to shock grows back along the transplanted hair.

Planting The Follicular Units In Auto Cloning, FUE And Long Hair Technique
Recipient Sites
In creating the Recipient sites, important consideration is given to four things.
1- Size
2- Angle
3- Direction
4- Types
Size
Follicular units diameter is the main determining factor for the recipient site size.
Recipient sites are made with custom cut micro blades in all three techniques. These micro blades are custom cut according to the size of the follicular units. For single hair follicular unit, the average size of the micro blade depending on hair diameter is 0.6 to 0.7 mm. For two hair follicular unit average size of the micro blade is 0.7-0.8 mm. For three to four hair follicular units, the average size of the blade is 0.8-0.9 mm. Needles and special blades also can be used for creating the sites.
Angle
Hair exit the scalp at different angle in different part of the scalp. In the hairline area , hair exit the scalp at an average 20 degree , as moving back toward the mid scalp angle gradually increases from 20 to 60 degree , moving further back angle gradually start decreasing in the crown area . In the occipital area, the hair exit the scalp at an average 20 degree. In the parietal area the hair exit the scalp at an average 20 degree angle. In the temple area the hair angle of exit is an average 10 degree.
Direction
In creating the recipient sites, important consideration is given to the direction as well. Sites are made according to the natural direction in the bald area. In the hairline ,near the frontal midpoint , hair are directed forward , as moving  from the frontal mid point toward the fronto temporal angle , hair gradually start directing sideways . Moving back in the mid scalp, the hair direction is same, but the angle change from 20 degree in hairline to 60 degree in the posterior part of the mid scalp. In the temple area, hair are directed down and backward. In the parietal area and occipital areas, hair are directed downward. In the crown or vertex area hair are in whorl pattern.
When creating sites in the thinning area, direction of the sites and angle of exit from the scalp is matched to the existing hair.
Types
There are two types of sites
1- Perpendicular
2- Parallel
Perpendicular
With perpendicular site creation the width throughout the length of the site stays same at any angle. When multiple hair follicular units are transplanted in perpendicular sites, Hair are lined side by side, it creates better density.
Parallel
With parallel site, the width of the site at skin level is an average 50% more. When multiple hair follicular units are transplanted in parallel sites, hair are lined behind each other, creating a less dense look in comparison to perpendicular sites.
Advantage of perpendicular sites
1-In the hair line the average desired angle of hair exit from skin is 20 degree. As the width of site throughout it length is same, it allows to achieve desired angle.
2-The the superficial trauma to the skin on an average is 50% less than the parallel sites.
3-As the width of site throughout it length is same, the follicular units has equal pressure through out the length of the site, leads to better healing.
4-In the area behind the hair line, two and three hair follicular units is used, hair is lined side by side, and it creates a look of better density.
Parallel sites
1-The width of the site throughout the entire length is same only if the sites are made at 90 degree angle, as the angle decrease the width of the site at skin level increases. In the hair line and temple area where the desired angle is 20 degree and 10 degree respectively, the width of the site at skin level is an average 50% more, it leads to increase superficial trauma , delay in healing  and inability to maintain the desired angle .
2-As the width of the site is more at skin level, the pressure on the follicular units decreases toward the surface. The uneven pressure on the follicular units can lead to difficulties in placing.
3-As the width is more at skin level, especially in hair line and temple area where the desired angle is 20 degree and 10 degree respectively, the follicular unit has more room to move so the desired angle cannot be achieved.
4-Behind the hair line where two and three hair follicular units are used, the hair are lined behind each other, create a less dense look in comparison to perpendicular sites.
Auto Cloning
The plucked hair are very delicate, after plucking hair are trimmed and dipped in A Cell Growth factor solution. Special precautions are taken during planting as the follicles do not have much supportive tissue around them. The survival of these follicular units are between 50 to 70 %. The transplanted area is noticeable for 10- 15 days.
FUE
The extracted follicular units are already trimmed, before planting the follicular units, they are treated with A Cell Growth factor solution. The survival of follicular units are 90 - 100 %.
The transplanted area is noticeable for 10 -15 days.
Long Hair Technique
The follicular units prepared under microscopes are healthy and strong . Survival of these follicular units are 100%. Use of A Cell is optional. These follicular units are untrimmed, when planted, keep the surgery sites unnoticeable and provide the preview of final outcome.
Alternate Approach To Long Hair Technique
The follicular units prepared under microscopes are healthy and strong. Survival of these follicular units are 100%. Use of A Cell is optional. These follicular units are trimmed. The transplanted area is noticeable for 10-15 days.
HOW TO CHOOSE THE RIGHT SURGERY FOR YOURSELF
Auto Cloning
Auto Cloning technique provide the multiplication of hair. The only technique where the total number of hair on the head increase after the transplant.
If the donor area is limited, without further reducing the donor area, hair can be transplanted
Newest option
Minimum post operative pain in the Donor area and no temporary numbness in the donor area.
FUE
Reasons to Choose FUE
1- If the life style of the client is to wear the hair very short like number 1 machine or keeping the hair shaved most of the time, FUE is better choice of not having any visible scaring in the donor area.
2- If client does not want to have incision and stitches, FUE can be chosen.
Long Hair Technique
Reasons to Choose the Long Hair Technique
1- Only technique which allows to go back to work next day without any surgical sites notice ability.
2- Long hair technique offers more follicular units in one surgery which results in major change in appearance.
3- Survival of transplanted hair is better than other techniques.
4- Long hair technique provides reasonably good density in one procedure.
5- Hair damage during the surgery is minimum 0-0.4 % with long hair technique.
6- With Long hair technique there is a possibility of fine scar in the donor area which is covered by the hair. If the lifestyle is to wear the hair half an inch or more in length most of the time, long hair technique is the absolute best choice. Best Hair Loss Treatment  | Female Hair Loss Treatment

Sunday, April 22, 2012

Restoring the temporal hair line


In the temple area the non receded Temporal hairline start at outer canthal plane , an average 4 cm in front of the pretragal vertical line , the temporal hairline extend down and forward at 45 to 60 degree angle up to the vertical outer canthal line , to create temporal peak . Non receded temporal peak is an average 1.5 cm higher than the eyebrow. From temporal peak temporal hairline extend down and backward at 45 to 60 degree angle and continue with the sideburns. Temporal hairline also recedes in hair loss. Temporal hairline recedes backward in Class 2-4 hair loss. In Class 5 to 7 hair loss, temporal hairline also recedes downward from outer canthal plane and temporal peak is lost.
If donor area allows, restoring the temporal hair line compliment the frontal hair line and make a complete hair line restoration.
If the temporal hairline has dropped below the outer canthal level, as in class 5-7 hair loss. If the donor area allows, this lost temporal hairline can be restored.
Draw a vertical line just in front of ear, where this vertical line intersect the outer canthal plane, mark that point. Mark another point 2 cm in front of it. Connect the receded temporal hair line to this point. To restore the temporal peaks, first try to find the traces of temporal peak, and restore it. If there is no trace of temporal peak, mark the new temporal peak .The average height of temporal peak from Frankfort horizontal line is 4.5 cm or 1.5 cm above the eyebrow level. Mark outer canthal line. Draw another vertical line parallel to the outer canthal line 1.5 cm behind it. Draw a horizontal line parallel to frankfort line at an average 4.5 cm height , Where this line intersect the vertical line behind the outer canthal line mark this point , it's  the apex of temporal peak . Drop the temporal hairline down and forward from the apex of fronto temporal angle at 45 degree to join the marked apex of temporal peak. From apex of temporal peak drop the temporal hairline down and backward at 45 degree angle to join the sideburns.
Once the marking is done, perpendicular sites at 10 degree angle are created in backward direction. Symmetrical irregularities are created just like the frontal hairline. Temporal hair line is restored by single hair follicular units.
Frontal and Temporal hair lines are restored independently and they meet at the outer canthal plane, the joining of these two hairlines at the outer canthal plane is called Apex of fronto temporal triangle.
Frontal hair line should not chase the receded temporal hair line, below the level of outer canthal plane, a common mistake, which should be avoided. Most common aesthetically bad hairlines can all together can be avoided, if the frontal hairline marking simply stays circumferentially horizontal along the lower transition zone of calvarium.
If donor area allows restoring both frontal and temporal hairline complement each other and provides the aesthetically great hair restoration.

Wednesday, April 18, 2012

Hair Line


To understand the hairline, one must have reviewed 100 s of natural non receded hair lines. One should also have complete knowledge of different racial hair lines and should have complete understanding of the height and width of the facial bony structures. These bony structure measurements in different races, determine the unique shape of the racial hair lines.
Vertical Facial dimensions
The face is divided into three parts. In generality the lower part is the largest in all races, the middle part is in the middle. The upper part is the smallest.
1- Upper part
2- Middle part
3- Lower part
1- Upper part
The upper part of the face is between hairline and the eyebrows. The height of the upper part is smallest of all the three facial heights. In Caucasians and Chinese the height of the upper part is almost same 5.7 cm. In Afro it's 0.5 cm more than the Caucasians and Chinese, its 6.18 cm. The vertical height of the upper parts provides a good parameter for restoring the height of the lost hairline. As the upper part in afro has more height, so do the hairline. On an average Afro hairline is 0.5 cm higher than Caucasians and Chinese.
2- Middle part
The middle part of the face is between eyebrows and the lower base of the nose. The height of the middle part of the face is almost same in all three races, it’s an average 6.7 cm.
3- Lower part
The lower part is between lower base of the nose and the chin. The height of the lower part of the face is largest of all the three facial heights in all the races. In Caucasians and Chinese the height of the lower part is almost same 7.25 cm. In Afro the height of the lower part is 0.5 cm more than the Caucasians and Chinese, its 7.75 cm.

Horizontal Facial Dimensions
In horizontal facial dimensions, four measurements are important.
1- Width of the head
2- Width of the eyes
3- Width of the mandible
4- Width of the jaw
Generally for every race , head is the widest , mandible is less wider than the head and jaw is the less wider than mandible . In Chinese, Head, Mandible and Jaw widths are the largest among all three races. In Afro, Head, Mandible and Jaw widths are smallest among all three races. In Caucasians, Head, Mandible and Jaw widths are in the middle among all three races.
The width of the eyes is least for Caucasians, in the middle for the Chinese and the most for Afro. Except for the width of the eyes, which is the widest in Afro, rest of the widths in Afro is the smallest among all the three races.
Widths of The Head, Mandible and Jaw Are Responsible for Different Facial Shapes

Afro Square Facial Shape
In Afro the width of the head is least among all the races, its 14.88 cm. The mandible width in Afro is 0.54 cm less than the width of the head. The width of the jaw is 3.92 cm less than the mandible. The general appearance of Afro face looks like a square due to the smallest head width and minimum reductions in widths from head to the mandible and mandible to the jaw.

Chinese Triangular Facial Shape
In Chinese the width of the head is the widest among all the races, its 15.83 cm. The mandible width is 0.65 cm less than the head width. The width of the jaw is 4.45 less than the mandible. The general appearance of the face in Chinese look like triangular due to widest head width and increased reduction in the width of mandible and jaw relative to the head .

Caucasian Elliptical Facial Shape
In caucasians, the width of the head is in the middle among all the three races, its 15.11 cm. The mandible width is 0.43 cm less than the head width. The width of the jaw is 4.12 cm less than the mandible. The general appearance of the face looks like elliptical due to less drastic reduction of mandible and jaw width relative to the head.


General Shape of the Skull
First of all a horizontal level is established at the level of eyebrows on the front , top of the ears on the sides and posterior pole of the skull on the back . Skull moves straight upward circumferentially from this level for an average 5-6 cm with 15 degree inward inclination. Above the vertical part Skull is Dome shaped and this part is called calvarium. Average height of the calvarium is 3-4 cm. Where the vertical part of the Skull end, it curves inward for an average 1 cm, this part is called lower transition zone of calvarium. After the transition zone, calvarium part of the Skull moves up 2-2.5 cm at an average 45 degree, at this point skull again curves inward to create an upper transition zone and become flat at top.
Hairline Creation Based on Bony Facial Dimensions
To create Frontal hair line inconsistent with person racial features does not look natural. Knowledge of different bony features and their measurement is extremely important to restore the unique individual hairlines.
Hair line is based on two important points.
1- Frontal Midpoint
2- Apex of Fronto Temporal Angle
Frontal Midpoint
There are two criteria based on Facial Dimensions to mark the Frontal Midpoint.
First Criteria for Marking the Frontal Midpoint
1-The Average height of the vertical part of the forehead is 5.7 cm. In Afro it's 0.5 cm higher. The Vertical part of the forehead moves up average at negative 15 degree angle and ends into lower transition zone of the calvarium. The height of lower transition zone of calvarium is an average 1 cm. Frontal Midpoint is marked in the middle of this transition zone. These general measurements give an idea about the height of the hairline from the eyebrows. Based upon the above general measurements average height of the hair line in Caucasian and Chinese is 6.5 cm and in Afro is 7 cm.
Second Criteria for Marking the Frontal Midpoint
2- Facial height is measured from eyebrows to the chin, if it's 13 cm, take half of that, 6.5 cm, to mark the frontal midpoint.
Apex of Fronto Temporal Angle
Frontal and temporal hairline meet at outer canthal plane to create fronto temporal angle, where they meet is called Apex of fronto temporal angle.
Locating The Missing Apex of Fronto Temporal Angle
Apex of Fronto Temporal Angle can be located by using two landmarks
1- Outer bony rims of the eyes
2- Begining of the Lateral Calvarium
1- Role of outer bony rims of the eyes in locating apex of fronto temporal angle
Width of the eyes plays very important role. A vertical line is drawn at the outer bony rim of the eyes, intersect this vertical line with the tangential line, drop this tangential line at right angle to the vertical line. Where this tangential line touches the skull, it’s the plane for the Apex of Fronto Temporal angle, also called outer canthal plane. Once the Outer canthal plane is located, next is to mark the Apex location on this plane. A vertical line is drawn in front of the ear, where this line intersects with the Outer canthal plane, it is marked. From this marked point move forward on Outer canthal plane 2 cm, mark this point, it's the Apex of fronto temporal angle.
2- Role of beginning of lateral calvarium in locating the apex of fronto temporal angle
Temporal and Parietal skull moves up vertically from ear ,after an average 6 cm it start curving inward for an average 1 cm called the lower transition zone of the calvarium . Outer canthal plane lies in the middle of this transition zone. Next is to mark the Apex location on this plane. A vertical line is drawn in front of the ear, where this line intersects with the Outer canthal plane, it is marked. From this marked point move forward on the Outer canthal plane 2 cm, mark this point, it's the Apex of fronto temporal angle.
Restoring The Hairline by Joining the Frontal Midpoint and Apex of Fronto Temporal Angle
Once the frontal midpoint and apex of fronto temporal angle is marked, join these two points at the level of middle of lower transition zone. It creates a shape of semicircle.  Depending on different racial head widths, it create an Oval hairline for caucassians, round for Chinese and broad flat hairline for Blackes.
The average length of the hairline semicircle is 16 cm. The average length of half of this semicircle from frontal midpoint to the Apex of fronto temporal angle is 8 cm. If this length ranges between 7 to 9 cm, frontal hairline aesthetically looks very good. If you join two apex points to create a coronal line, the average distance between frontal midpoint and this line is 6.5 cm in saggital plane.
Once the hairline is drawn based on bony features of the skull and face, it is discussed with the client. Hairline is reviewed in mirror first by standing behind the client and then standing on each side of the client.  The hairline is even and symmetrical when viewed from the front and the back. From side view hairline should look horizontal and with very little forward lower inclination. The Apex point should never be lower than the Frontal point on profile in horizontal plane. Pictures of the drawn hairline are reviewed .Client previous pictures are reviewed. Minor Adjustments are made on the request of client. Minor adjustments are also made based on the unique individual features.
Once after the discussion with the client, hairline is decided, minor irregularities are made in it.
Transition zones of gradual increase in the density are marked. A line is marked 3-4 mm behind the decided hairline, single hair follicular units are planted in this zone in a irregular pattern of planting 1cm wide and leaving 1 cm wide without planting. An average low density of 20 single hair follicular units per cm square is achieved. Another line is drawn 3-4 mm behind the single follicular units. An average density of 30-40 single follicular units per cm square are achieved in this zone. In these two zones of single hair follicular units, perpendicular sites at 20 degree angle with forward direction are made, as the hair move from frontal midpoint toward the Apex point, hair fans out outside. Another 1 cm deep zone is drawn behind these two zones of single hair follicular units, in this zone two hair follicular units are used in perpendicular sites at an average 30 degree angle. Behind the two hair follicular units zone three hair follicular units are used. As this zone move back from frontal area to Mid Scalp area, the sites angle gradually increases from 30 to 60 degree. Best Hair Loss Treatment | Hair transplant Dubai